Skip to content
events calendar banner heading
Loading Events

All events for Makerspace: CNC Router Workshop

« All Events

September 2019

Makerspace: CNC Router Workshop

September 3, 2019 @ 3:00 pm - 4:30 pm
|Recurring Event (See all)

An event every week that begins at 3:00pm on Tuesday, repeating until December 12, 2019

Cosmetology Building — COS 108, 3835 Freeport Blvd.
Sacramento,95822

Learn the basics on how to operate this commercial 4x8 CNC router in this workshop. Many techniques are covered, as well as safety procedures. Be prepared for at least 1.5 hours during this session, and be prepared to take several workshops on this machine! Workshops are free. No advanced booking is required, just show up and let one of our staff know you're here for the training. Open to all students, faculty, and staff. YOUR STUDENT TRAINER: Christian Espinoza, EDT Student…

Find out more »

Makerspace: CNC Router Workshop

September 10, 2019 @ 3:00 pm - 4:30 pm
|Recurring Event (See all)

An event every week that begins at 3:00pm on Tuesday, repeating until December 12, 2019

Cosmetology Building — COS 108, 3835 Freeport Blvd.
Sacramento,95822

Learn the basics on how to operate this commercial 4x8 CNC router in this workshop. Many techniques are covered, as well as safety procedures. Be prepared for at least 1.5 hours during this session, and be prepared to take several workshops on this machine! Workshops are free. No advanced booking is required, just show up and let one of our staff know you're here for the training. Open to all students, faculty, and staff. YOUR STUDENT TRAINER: Christian Espinoza, EDT Student…

Find out more »

Makerspace: CNC Router Workshop

September 17, 2019 @ 3:00 pm - 4:30 pm
|Recurring Event (See all)

An event every week that begins at 3:00pm on Tuesday, repeating until December 12, 2019

Cosmetology Building — COS 108, 3835 Freeport Blvd.
Sacramento,95822

Learn the basics on how to operate this commercial 4x8 CNC router in this workshop. Many techniques are covered, as well as safety procedures. Be prepared for at least 1.5 hours during this session, and be prepared to take several workshops on this machine! Workshops are free. No advanced booking is required, just show up and let one of our staff know you're here for the training. Open to all students, faculty, and staff. YOUR STUDENT TRAINER: Christian Espinoza, EDT Student…

Find out more »

Makerspace: CNC Router Workshop

September 24, 2019 @ 3:00 pm - 4:30 pm
|Recurring Event (See all)

An event every week that begins at 3:00pm on Tuesday, repeating until December 12, 2019

Cosmetology Building — COS 108, 3835 Freeport Blvd.
Sacramento,95822

Learn the basics on how to operate this commercial 4x8 CNC router in this workshop. Many techniques are covered, as well as safety procedures. Be prepared for at least 1.5 hours during this session, and be prepared to take several workshops on this machine! Workshops are free. No advanced booking is required, just show up and let one of our staff know you're here for the training. Open to all students, faculty, and staff. YOUR STUDENT TRAINER: Christian Espinoza, EDT Student…

Find out more »

October 2019

Makerspace: CNC Router Workshop

October 1, 2019 @ 3:00 pm - 4:30 pm
|Recurring Event (See all)

An event every week that begins at 3:00pm on Tuesday, repeating until December 12, 2019

Cosmetology Building — COS 108, 3835 Freeport Blvd.
Sacramento,95822

Learn the basics on how to operate this commercial 4x8 CNC router in this workshop. Many techniques are covered, as well as safety procedures. Be prepared for at least 1.5 hours during this session, and be prepared to take several workshops on this machine! Workshops are free. No advanced booking is required, just show up and let one of our staff know you're here for the training. Open to all students, faculty, and staff. YOUR STUDENT TRAINER: Christian Espinoza, EDT Student…

Find out more »

Makerspace: CNC Router Workshop

October 8, 2019 @ 3:00 pm - 4:30 pm
|Recurring Event (See all)

An event every week that begins at 3:00pm on Tuesday, repeating until December 12, 2019

Cosmetology Building — COS 108, 3835 Freeport Blvd.
Sacramento,95822

Learn the basics on how to operate this commercial 4x8 CNC router in this workshop. Many techniques are covered, as well as safety procedures. Be prepared for at least 1.5 hours during this session, and be prepared to take several workshops on this machine! Workshops are free. No advanced booking is required, just show up and let one of our staff know you're here for the training. Open to all students, faculty, and staff. YOUR STUDENT TRAINER: Christian Espinoza, EDT Student…

Find out more »

Makerspace: CNC Router Workshop

October 15, 2019 @ 3:00 pm - 4:30 pm
|Recurring Event (See all)

An event every week that begins at 3:00pm on Tuesday, repeating until December 12, 2019

Cosmetology Building — COS 108, 3835 Freeport Blvd.
Sacramento,95822

Learn the basics on how to operate this commercial 4x8 CNC router in this workshop. Many techniques are covered, as well as safety procedures. Be prepared for at least 1.5 hours during this session, and be prepared to take several workshops on this machine! Workshops are free. No advanced booking is required, just show up and let one of our staff know you're here for the training. Open to all students, faculty, and staff. YOUR STUDENT TRAINER: Christian Espinoza, EDT Student…

Find out more »

Makerspace: CNC Router Workshop

October 22, 2019 @ 3:00 pm - 4:30 pm
|Recurring Event (See all)

An event every week that begins at 3:00pm on Tuesday, repeating until December 12, 2019

Cosmetology Building — COS 108, 3835 Freeport Blvd.
Sacramento,95822

Learn the basics on how to operate this commercial 4x8 CNC router in this workshop. Many techniques are covered, as well as safety procedures. Be prepared for at least 1.5 hours during this session, and be prepared to take several workshops on this machine! Workshops are free. No advanced booking is required, just show up and let one of our staff know you're here for the training. Open to all students, faculty, and staff. YOUR STUDENT TRAINER: Christian Espinoza, EDT Student…

Find out more »

Makerspace: CNC Router Workshop

October 29, 2019 @ 3:00 pm - 4:30 pm
|Recurring Event (See all)

An event every week that begins at 3:00pm on Tuesday, repeating until December 12, 2019

Cosmetology Building — COS 108, 3835 Freeport Blvd.
Sacramento,95822

Learn the basics on how to operate this commercial 4x8 CNC router in this workshop. Many techniques are covered, as well as safety procedures. Be prepared for at least 1.5 hours during this session, and be prepared to take several workshops on this machine! Workshops are free. No advanced booking is required, just show up and let one of our staff know you're here for the training. Open to all students, faculty, and staff. YOUR STUDENT TRAINER: Christian Espinoza, EDT Student…

Find out more »

November 2019

Makerspace: CNC Router Workshop

November 5, 2019 @ 3:00 pm - 4:30 pm
|Recurring Event (See all)

An event every week that begins at 3:00pm on Tuesday, repeating until December 12, 2019

Cosmetology Building — COS 108, 3835 Freeport Blvd.
Sacramento,95822

Learn the basics on how to operate this commercial 4x8 CNC router in this workshop. Many techniques are covered, as well as safety procedures. Be prepared for at least 1.5 hours during this session, and be prepared to take several workshops on this machine! Workshops are free. No advanced booking is required, just show up and let one of our staff know you're here for the training. Open to all students, faculty, and staff. YOUR STUDENT TRAINER: Christian Espinoza, EDT Student…

Find out more »